Actual program run on CNC machine

Follow the below steps ;

Step 1 – Press “ AUTO” key.

Step 2 – Removal “M/C LOCK”. If the machine is lock by pressing machine lock key.

Step 3 – Keep “FEEDRATE” zero .

Step 4 – Press “ PROG” key. And select the required program by clicking the program key.

Step 5 – Press “ CYCLE START” key.

Step 6 – Gradually increase the feed rate.

Step 7 – After  work was performed then press “CYCCLE STOP” key.



 click here  MDI    JOG    EDIT   OFFSET  GRAPH