MAIN PROG description of STEP TURNING AND FACING

following are MAIN PROG description of STEP TURNING AND FACING for main program
 CLICK HERE !

 .

DESCRIPTION OF PROGRAM
Main prog file name HARSH

N1- Program in absolute co-ordinate system , metric input inmm , feed in mm/min ,Feed rate 100 .

N2 – Tool at reference point  were X0 and Z0 .

N3 – Tool change command , select no of tool 6 , tool offset no 01 .

N4 – Spindle on clockwise at speed 1000 .

N5- Coolent on .

N6- Rapid command at X 27 and Z 2  . ( Tool takes position )

N7 – Linear command tool near to job at X25 and Z0  .

N8-Linear command tool touch to the job at X25 and Z-2 .

N9- Linear command cutting operation start each cut 2 mm .

X-1 and z-2  .(facing)

N10 -  Rapid command tool goes away at X 27 and Z at same place .

N11 – Tool goes rapidly at safe position at X27 and Z2 .

N12 – Tool ready at x axis for another cut linearly .

N13- Tool touch to job for next cutting linearly .

N14- Linear command cutting operation start each cut 2 mm .

X-1 and Z-4  .(facing)

N15- -  Rapid command tool goes away at X 27 and Z at same place .

N16- Tool goes rapidly at safe position at X27 and Z2 .

N17- Tool ready at x axis for another cut linearly .

N18 - Tool touch to job for next cutting linearly .

N19- Linear command cutting operation start each cut 2 mm .

X-1 and Z-6  .(facing)

N20- Rapid command tool goes away at X 27 and Z at same place .

N21- Tool goes rapidly at safe position at X27 and Z2 .

N22- Tool touch to job for next cutting linearly .

N23- Tool touch to job for next cutting linearly

N24- Linear command cutting operation start each cut 2 mm .

X-1 and Z-8  .(facing)

N25- Rapid command tool goes away at X 27 and Z at same place .

N26- Tool goes rapidly at safe position at X27 and Z2 .

N27- Tool ready at x axis for another cut linearly

N28- Tool touch to job for next cutting linearly

N29-- Linear command cutting operation start each cut 2 mm .

X-1 and Z-10  .(Facing operation end)

N30- Rapid command tool goes away at X 27 and Z at same place .

N31- Tool goes rapidly at safe position at X27 and Z2.

N32 - Tool ready at x axis for another cut linearly.

N33- Linear command cutting operation start each cut 0.5 mm .

X25 and Z-25  .(first step turning start)(means each turning cut reduce 1 mm diameter)

N34- Rapid command tool goes away at X 27 and Z at same place.

N35- Tool goes rapidly at safe position at X27 and Z2.

N36- Tool touch to job for next cutting linearly at X24 .

N37- Linear command cutting operation start each cut 0.5 mm .

X24 and Z-25  . (means each turning cut reduce 1 mm diameter)

N38- Rapid command tool goes away at X 27 and Z at same place

N39 - Tool goes rapidly at safe position at X27 and Z2.

N40- Tool touch to job for next cutting linearly at X23 .

N41- Linear command cutting operation start each cut 0.5 mm .

X23 and Z-25  . (means each turning cut reduce 1 mm diameter)

N42- Rapid command tool goes away at X 27 and Z at same place

N43- Tool goes rapidly at safe position at X27 and Z2.

N44- Tool touch to job for next cutting linearly at X22 .

N45- Linear command cutting operation start each cut 0.5 mm .

X22 and Z-25  . (means each turning cut reduce 1 mm diameter)

N46- Rapid command tool goes away at X 27 and Z at same place

N47- Tool goes rapidly at safe position at X27 and Z2.

N48- Tool touch to job for next cutting linearly at X21 .

N49- Linear command cutting operation start each cut 0.5 mm .

X21 and Z-25  . (means each turning cut reduce 1 mm diameter)

N50- Rapid command tool goes away at X 27 and Z at same place.

N51- Tool goes rapidly at safe position at X27 and Z2.

N52-  Tool touch to job for next cutting linearly at X20.

N53- Linear command cutting operation start each cut 0.5 mm .

X21 and Z-25  .( firtst step Turning end ) (means each turning cut reduce 1 mm diameter)

N54- Rapid command tool goes away at X 27 and Z at same place

N55- Tool goes rapidly at safe position at X27 and Z2.

N56-  Tool touch to job for next cutting linearly at X19.

N57 - Linear command cutting operation start each cut 0.5 mm .

X19 and Z-25  .( Second step Turning start ) (means each turning cut reduce 1 mm diameter)

N58- Rapid command tool goes away at X 27 and Z at same place

N59- Tool goes rapidly at safe position at X27 and Z2.

N60 - Tool touch to job for next cutting linearly at X18.

N61- Linear command cutting operation start each cut 0.5 mm .

X18 and Z-25  . (means each turning cut reduce 1 mm diameter)

N62- Rapid command tool goes away at X 27 and Z at same place

N63- Tool goes rapidly at safe position at X27 and Z2.

N64 - Tool touch to job for next cutting linearly at X17.

N65- Linear command cutting operation start each cut 0.5 mm .

X17 and Z-25  . (means each turning cut reduce 1 mm diameter)

N66- Rapid command tool goes away at X 27 and Z at same place.

N67 - Tool goes rapidly at safe position at X27 and Z2.

N68- Tool touch to job for next cutting linearly at X16.

N69- Linear command cutting operation start each cut 0.5 mm .

X16 and Z-25  . (means each turning cut reduce 1 mm diameter)

N70 - Tool at reference point  were X0 and Z0 .

N71- Spindle off .

N72 – Coolent off .

N73 – Main program end .